- Intellicharge Pulse Technology which gives upto 70 % increased battery life
- Automatic Overload Restart
- High efficiency gives Longer backup time
- Battery Overcharge / Deep discharge Protection
- Battery level / load level display
- Option for Fast changeover for Computer Use
- Low / High Input Voltage Cutoff
- Single Card Design for ease of Servicing
| Input Voltage | 150 Volt - 300 Volt |
| Input Frequency | 50 Hz + 4 % |
| Output Voltage | Mains Mode :Same as Input Inverter Mode : 220 - 250 Volt + 6 % |
| Output Frequency | Mains Mode : Same as Input Inverter Mode : 50 Hz + 0.5 % |
| Inverter Type | Pulse Width Modulation ( MOSFET Based ) |
| Design Platform | Microcontroller Based |
| Wave Form | Synchro Quasi Sine Wave on Inverter |
| Load Power Factor | 0.80 Lagging to Unity |
| Overall Efficiency | > 85 % |
| Charger Type | Triac Based Boost / Trickle Charger |
| Protections | Low Battery & Overload : Continous Beep with Electronic
Shutdown Under Volatge : Tripover to the Inverter Mode for Input Voltage < 100 Volt A.C & D.C. Shortcircuit : Fuse Protection |
| Display | Load Level; Battery Level; Input Mains Voltage ; Charging Status; Overload / Low Battery Conditions etc. displayed on the 16x2 LCD Display. |
| Overload | Automatic Overload Restart |
| Operating Temperature | -2 to 45 Degree centigrade |
| Humidity | upto 95 % Non Condensing |
Premier
EnterprisesE-158 (Ground
Floor), Kalkaji, New Delhi - 110019Phone:
(+91-11) 26482649 & 26481586 Email:
power@pdyne.com Website:
www.pdyne.com 
Capacity