Input Voltage |
230 Volt -20 % +15 % Single Phase
415 Volt - 20 % + 15 % Three Phase |
Input Frequency |
50 Hz + 10 % |
Output Voltage |
230 Volt + 1 % Single Phase
415 + 1 %Volt Three Phase |
Output Frequency |
50 Hz + 0.05 Hz ( Crystal
Controlled ) |
Design Platform |
Eprom / Microcontroller Based Design |
Inverter Type |
IGBT Based PWM Hi Frequency
Inverter |
Wave Form |
Harmonic Free True Sine Wave |
Transfer Time |
Nil |
Load Power Factor |
0.80 Lagging to Unity |
Overall Efficiency |
Inverter 92 %
Overall > 85 % |
Charger Type |
Float Cum Boost Charger |
Harmonic Distortion |
<3 % THD |
Overload Capacity |
110 % Maximum for 10 Minutes |
Crest Factor |
> 4 : 1 |
Transient Recovery |
Recovery within 30 ms |
Protections |
Low Battery & Overload :
Continous Beep with Electronic Shutdown
A.C & D.C. Shortcircuit : Fuse / M.C.B Protection
Temperature Control : Forced Air Cooling |
Operating Temperature |
-2 to 45 Degree centigrade |
Humidity |
upto 95 % Non Condensing |
Noise Level |
< 50 db upto 10 KVA Rating |