- Harmonic free true Sine wave Output
- Highly Stable Output ideal for chronic line variations
- Multistage Spike / Surge Protection
- Low Component Count & H.M.T.B failure
- High efficiency & low noise level
- Forced Air Cooling
- Computer Interface
| Input Voltage | 180 Volt - 260 Volt |
| Input Frequency | 50 Hz + 4 % |
| Output Voltage | 220 Volt + 1 % |
| Output Frequency | 50 Hz + 0.5 % |
| Inverter Type | Ferroresonant ( C.V.T / MOSFET Based ) |
| Wave Form | Harmonic Free True Sine Wave |
| Transfer Time | Nil |
| Load Power Factor | 0.80 Lagging to Unity |
| Overall Efficiency | Inverter 90 % Overall > 85 % |
| Charger Type | SCR Based |
| Harmonic Distortion | <3 % THD |
| Overload Capacity | 110 % Maximum |
| Transient Recovery | Recovery within 30 ms |
| Protections | Low Battery & Overload :
Continous Beep with Electronic Shutdown A.C & D.C. Shortcircuit : Fuse / M.C.B Protection Temperature Control : Forced Air Cooling |
| Operating Temperature | -2 to 45 Degree centigrade |
| Humidity | upto 95 % Non Condensing |
Premier
EnterprisesE-158 (Ground
Floor), Kalkaji, New Delhi - 110019Phone:
(+91-11) 26482649 & 26481586 Email:
power@pdyne.com Website:
www.pdyne.com