| Input Voltage |
230 Volt -20 % +15 % Single Phase
415 Volt - 20 % + 15 % Three Phase |
| Input Frequency |
50 Hz + 10 % |
| Output Voltage |
230 Volt + 1 % Single Phase
415 + 1 %Volt Three Phase |
| Output Frequency |
50 Hz + 0.05 Hz ( Crystal
Controlled ) |
| Design Platform |
Eprom / Microcontroller Based Design |
| Inverter Type |
IGBT Based PWM Hi Frequency
Inverter |
| Wave Form |
Harmonic Free True Sine Wave |
| Transfer Time |
Nil |
| Load Power Factor |
0.80 Lagging to Unity |
| Overall Efficiency |
Inverter 92 %
Overall > 85 % |
| Charger Type |
Float Cum Boost Charger |
| Harmonic Distortion |
<3 % THD |
| Overload Capacity |
110 % Maximum for 10 Minutes |
| Crest Factor |
> 4 : 1 |
| Transient Recovery |
Recovery within 30 ms |
Protections |
Low Battery & Overload :
Continous Beep with Electronic Shutdown
A.C & D.C. Shortcircuit : Fuse / M.C.B Protection
Temperature Control : Forced Air Cooling |
| Operating Temperature |
-2 to 45 Degree centigrade |
| Humidity |
upto 95 % Non Condensing |
| Noise Level |
< 50 db upto 10 KVA Rating |
Printable Page